CHANGE OIL AND FILTER, CK AND FILL FLUIDS, CHECK AND SET AIR PRESSURE IN TIRES VISUAL INSPECTION OF OVERALL CONDITION OF VEHICLE
DISC ROTOR – Remove & Replace – Rear,Both – [Includes: Replace Pads (if necessary). DOES NOT include refinishing.]
Clean the master cylinder cap area and remove the old fluid from the reservoir. Fill with fresh fluid and flush with power brake flush machine by pressurizing brake master cylinder and vacuuming old fluid out of each brake bleeder until the fluid is clean
Brenda L. gave our service a 5 star review on 2/2/2024
Remove and reinstall four wheels and rear brake drums to inspect brake condition. Inspect entire system for leaks. Lining remaining is: Front ( %) Rear ( %)
Inspect hoses and clamps. Pressure test cooling system. Flush engine, radiator, and heater core . Bring antifreeze to -35 degrees. Check thermostat and electric cooling fan operation.
PATRICA K. gave our service a 5 star review on 1/19/2024
LONG BLOCK – Remove & Replace – LT,LTZ,In-Line4 – [Consists of a Cylinder Block fitted with Pistons, Rings, Connecting Rods, Crankshaft and all Bearings, Cylinder Head(s), Camshaft(s), Timing Chain or Belt and Sprockets or Gears. Includes (where applicabl
LUBE OIL FILTER
Inspect hoses and clamps. Pressure test cooling system. Flush engine, radiator, and heater core . Bring antifreeze to -35 degrees. Check thermostat and electric cooling fan operation.
Service air conditioner. Check condition of all belts and lines. Test system performance.
TIE ROD &/OR END – Remove & Replace – Inner,One Side – [Includes: R&I Outer Tie Rod End.] – [Includes: Adjust toe-in only. NOTE: Deduct .4 if alignment is also performed. NOTE: Manufacturer recommends removal of Rack and Pinion Steering Gear when replacin
JUDITH C. gave our service a 5 star review on 11/3/2023