CHANGE OIL AND FILTER, CK AND FILL FLUIDS, CHECK AND SET AIR PRESSURE IN TIRES VISUAL INSPECTION OF OVERALL CONDITION OF VEHICLE
CHECK POWER STEERING – IDLES ROUGH
DISC ROTOR – Remove & Replace – Front,Both – [Includes: Replace Pads (if necessary). DOES NOT include refinishing.]
POWER STEERING PUMP – Remove & Replace – All Applicable Models
Remove and reinstall four wheels and rear brake drums to inspect brake condition. Inspect entire system for leaks. Lining remaining is: Front ( %) Rear ( %)
Road test and verify engine performance, transmission operation, and shift patterns. Flush transmission which includes: flushing of transmission cooler, cooler lines, valve body, and torque converter. Flush all contaminated fluid out and replace with new fluid and Wynn's Transmission
STABILIZER BAR CONTROL LINK – Remove & Replace – Both
Additional Maintenance Items for Severe Operating Conditions. BRAKE SYSTEM – INSPECT – [Brake pads, rotors, drums & linings: Check for wear, deterioration and fluid leaks. Replace any deteriorated or damaged parts immediately.] DRIVESHAFT BOOTS – INSPECT EXHAUST SYSTEM – INSPECT – [Visually inspect the exhaust pipes, muffler and hangers for leaks, cracks, deterioration, and damage. Tighten connections or replace parts as necessary.] PROPELLER SHAFT – INSPECT – [Check for damage, looseness, and grease leakage.] STEERING SYSTEM – INSPECT – [Steering Gear and Linkage, Axle and Suspension Parts, Drive Shaft Boots: Check for damage, looseness, and leakage of oil or grease. Under severe driving conditions, inspect more frequently.] SUSPENSION COMPONENTS – INSPECT – [Axle and suspension parts: Check for damage, looseness, and leakage of oil or grease. Under severe driving conditions, inspect more frequently. Inspect front suspension ball joints.]
CHANGE OIL AND FILTER, CK AND FILL FLUIDS, CHECK AND SET AIR PRESSURE IN TIRES VISUAL INSPECTION OF OVERALL CONDITION OF VEHICLE
DISC ROTOR – Remove & Replace – Front,Both Sides – [Includes: Repack Wheel Bearings (where applicable) and replace Pads (if necessary). DOES NOT include refinishing.]
DISC ROTOR – Remove & Replace – Rear,Both Sides – [Includes: Repack Wheel Bearings (where applicable) and replace Pads (if necessary). DOES NOT include refinishing.]
MOUNT AND BALANCE 4 TIRES REPLACE VALVE STEMS DIPOSE OF OLD TIRES
SHANNON S. gave our service a 5 star review on 10/18/2019
CHANGE OIL AND FILTER, CK AND FILL FLUIDS, CHECK AND SET AIR PRESSURE IN TIRES VISUAL INSPECTION OF OVERALL CONDITION OF VEHICLE
HIGH SPEED WOBBLES WHEN BREAKING
SHOCK &/OR STRUT ASSEMBLY – Remove & Install or Remove & Replace – AWD Both Sides – [DOES NOT include disassemble or alignment.]
THRUST ANGLE ALIGN SET FRONT AND REAR WHEELS TO SPECIFATIONS
TIE ROD &/OR END – Remove & Replace – Outer,One Side – [Includes: Adjust toe-in only. NOTE: Deduct .4 if alignment is also performed. NOTE: Manufacturer recommends removal of Rack and Pinion Steering Gear when replacing Inner Tie Rod End(s) on some models
ALAN T. gave our service a 5 star review on 10/10/2019